Good performance of EP vehicles rely on the Electronic speed controller and motor, The new style
ESC(18051)works on 1/10 Crawler ,is a new kind of drive FET amp with high frequency and reverse function.
Unlike the other ESC,the setting have been simplied.,It is suitable for the novice and the experience operator.
If the running speed is bigger than the original data of ESC,the ESC will update the full speed automatically,
forward means forward,backward means backward,center position means brake automatically.
Electronic Speed Controller-ESC(18051)
Technical Data
BEC:5V 1A
●
Input Voltage:6V-8.4V DC
●
●
●
●
Current Capacity(FET range):Forward=100A;Backward=50A
●
Case Dimensions:L35*W33*H30(include protective heat guard)
Weight:46.3g
Correspond Motor:540/23T or above
Note:
1.The ESC is not waterproof,so the water can’t flow into the ESC.The battery plug should pull
outed immediately once water flowed,use the blower to dry it before electrify test.
2.The ESC is hot in use.and the Heat Guard of ESC is very high after operation.so it can’t be
touched in use or after operation.
Connections
P us h b ut to n
( R e d )
( B la ck )
( B l ac k )
( R e d )
Power Switch
Motor Connector
Note: Red is "+",and Black is "-".
Reverse connectors if the motor works in the wrong
direction.
Battery connector
Note: Red is "+",and Black is "-".
Receiver connector
It will be connected to the receiver throttle channel.
(Reset Button)
Connector Setting:
1.Neutral Set:The ESC sustain the car foward,backward with a distance 50%/50%&70%/30%center position
of transmitter motor control mode. While you adjust to the above mode.We recommend you adjust the
speed range of transmitter to the normal.The ESC will update the full speed automatically.The LED blink
in red and yellow indicates searing the neutral
2.According to the diagram above,perform the correct collections,turn on the transmitter then the ESC,
Once ESC is turned on,it automatically switched to Neutral,you can hear a subtly confirmed sound(DO,
RE MI)that indicates ESC is set at netural .If the motor can’t stop running after the neutral position is
settd for a period of time,please close the ESC switch then reopen it,the neutral position should be reset it.
Features:
1.Pull your transmitter trigger back to expect your car to go forward.in this way,LED is supposed
to blink
slowly in red.As the running speed of your Car rises,LED blink faster.If the full speed reaches,LED will
become steady in red.
2.Push the trigger outward to stop the car immediately(breaking).LED blink slowly in red,If the full speed
of brake reaches,LED will become steady in red.
3.Push the trigger outward again to drive the car backward.LED blink slowly in red.If the full speed reaches,
Led will become steady in red.
Rear Unit
Front Unit
2
1
18025
18025
18007
18041
18041
18041
18041
18041
18041
18008
18001
Sp9001
18016
18016
18012
18012
18006
18006
18004
18004
18032
18040
18040
18009
18003
18043
98066
18035
18035
18034
18034
18032
18032
18005
18041
18032
18005
18044
18041
18052
18052
18021
18042
18033
18033
02030
98068
98068
98068
98068
18041
18002
18034
18033
98055
98055
98055
98055
18021
18044
98069
98069
98069
18016
18033
18007
18040
18001
18043
98066
18034
18032
18016
18033
18032
18032
18004
18016
18016
18012
98068
18041
18042
18033
18034
98055
18003
98069
18035
18004
18041
18005
18005
18005
18005
18012
18002
98068
18035
18041
18006
18041
18009
02030
18036
18036
18008
18032
18034
18009
18023
18015
18006
98068
18041
18048
18048
5
6
