iv
Cautions (continued)
Cautions (continued)
Cautions (continued)
Cautions (continued)
•
Leave the back of the frame clear for air exhaust cooling and to
allow room for cabling. Slots and openings in the cabinet are
provided for ventilation. Do not block them.
•
Front door is part of fire enclosure and should be kept closed
during normal operation.
•
This product should be powered on as described in the manual.
To prevent equipment damage select the proper line voltage at
the ac input connector as described in the Installation
documentation.
•
To prevent damage to this equipment read the instructions in
this document for proper input voltage range selection.
•
To reduce the risk of electric shock, ensure that the two power
supply cords are each plugged into a separate branch circuit.
•
Circuit boards in this product are densely populated with surface
mount and ASIC components. Special tools and techniques are
required to safely and effectively troubleshoot and repair
modules that use SMT or ASIC components. For this reason,
service and repair of RJM products incorporating surface mount
technology are supported only on a module exchange basis.
Customers should not attempt to troubleshoot or repair modules
that contain SMT components. RJM assumes no liability for
damage caused by unauthorized repairs. This applies to both in-
and out-of-warranty products.
Nort
Nort
Nort
North American Power Supply Cords
h American Power Supply Cords
h American Power Supply Cords
h American Power Supply Cords
This equipment is supplied with molded grounding plug (NEMA 5-
15P) at one end and molded grounding connector (IEC 320-C13) at
the other end. Conductors are CEE color coded, light blue (neutral),
brown (line) and green/yellow (ground).
Operation of this equipment at voltages exceeding 130 VAC will
require power supply cords which comply with NEMA
configurations.
