RJM Amp Gizmo, Руководство пользователя, Страница: 9 / 22

Back Panel
Power
To Amplifier Switch 1/2 Switch 3/4 Switch 5/6 Switch 7/8
MIDI Thru /
Out
MIDI In
9-18V
AC / DC
Model AG-2 RJM Music Technology, Inc. www.rjmmusic.com
To Amplifier – Connect the custom amplifier interface cable here. Use
the cable end that has a yellow label reading “RG-16 / A
MP
G
IZMO
.”
The other end of the cable plugs into your amp’s footswitch jack.
Before connecting, make sure that you have the cable that’s made
specifically for your amp. Cables are available for a variety of makes
and models of amplifiers. Check our website for a list of currently
available cables.
Switch 1/2 – This jack is for function switches 1 and 2. You can plug a
mono or stereo (TRS) ¼” cable here. Switch 1 is on the tip conductor
and Switch 2 is on the ring conductor (when using a TRS cable).
Switch 3/4 – This jack is for Switches 3 and 4. You can plug a mono or
stereo (TRS) ¼” cable here. Switch 3 is on the tip conductor and
Switch 4 is on the ring conductor (when using a TRS cable).
Switch 5/6 – This jack is for Switches 5 and 6. You can plug a mono or
stereo (TRS) ¼” cable here. Switch 5 is on the tip conductor and
Switch 6 is on the ring conductor (when using a TRS cable).
Switch 7/8 – This jack is for Switches 7 and 8. You can plug a mono or
stereo (TRS) ¼” cable here. Switch 7 is on the tip conductor and
Switch 8 is on the ring conductor (when using a TRS cable).
MIDI Thru/Out – All of the MIDI commands that are received at the
MIDI In jack are sent out through this jack. This jack also doubles as a
MIDI output when transferring patch data over MIDI.
3