RJM Amp Gizmo, Руководство пользователя, Страница: 18 / 22

To enter Group mode, hold down the Switch 4 button while powering
up the A
MP
G
IZMO
. Keep holding the button until the LEDs flash.
Use the front panel buttons to light the LED of any function that should
be in the group. Make sure that no other LEDs are lit.
Once you’ve selected the functions that need to be grouped, press the
Write button. The A
MP
G
IZMO
is now in normal operational mode and
the grouped buttons will now only allow one button to be selected at a
time.
Quick Setup Buttons
Quick Setup buttons are provided to quickly set up the A
MP
G
IZMO
for
common configurations. Which configuration you use depends on the
number of channels your amplifier has, and whether the amplifier uses
momentary switching or not.
To use this feature, hold down the Switch 8 button while powering up
the A
MP
G
IZMO
. Keep holding the button until the LEDs all turn on and
stay on.
Next, press one of the following buttons. Based on the button pressed,
the A
MP
G
IZMO
will configure the switches buttons as follows:
Hold Switch 1: No switches momentary or grouped. (Default setting)
Hold Switch 2: First two switches grouped, no switches momentary.
(Most 2 channel amps)
Hold Switch 3: First three switches grouped, no switches momentary.
(Most 3 channel amps)
Hold Switch 4: First four switches grouped, no switches momentary.
(Most 4 channel amps)
Hold Switch 5: All switches momentary, none grouped. (Rivera M and
S amps)
12