RJG Lynx LE-R-50-REVB, Руководство по эксплуатации продукта

Страница: 12 / 22

Lynx™ 50-Inch Stroke/Velocity Sensor LE-R-50-REVB | Product Manual
6
CONNECTIONS
The LE‑R‑50‑REVB is connected to the
eDART or CoPilot system with a single Lynx
cable (CE‑LX5‑4M‑F90) featuring a 90°
female end for ease of installation.
INSTALLATION SPECIFICATIONS ( continued )
NOTES
L
Strain‑relieve the Lynx cable so
that movement of the sled does not
place strain on the LE‑R‑50‑REVB
connector.
1.
Fixed Installation
Fix the cable so that the bend radius
is no smaller than five times the cable
diameter—1.25” (31,75 mm)—to ensure a
long service life.
2.
Flexible Installation
The cable length must be sufficient to
adequately absorb the tensile loads; the
bend radius is no smaller than ten times
the cable diameter—2.5” (63,5 mm)—to
ensure a long service life.
R (MIN)=5 x DIA
F
ixed
i
nstallation
F
lexible
i
nstallation
R (MIN)=10 x DIA
Install the Lynx cable female end on the
LE‑R‑50‑REVB connector.
Install the Lynx cable male end on the
appropriate junction for the eDART or
CoPilot system connector.
There must not be movement between the
cable plug and the connector, as it may
have a tendency to wear on the connector
insert and cause premature failure.