
10
TAC-200D Revision 5
Plug USB connector from DG100 Battery
Charger (DG100-01) into the back of the DG100
and then plug the charger into a 110/220 volt
outlet. The DG100 will charge to 100% in 12
hours and charge to 90% in 2 to 3 hours.
In addition, the DG100 can be charged using a standard USB to mini-B
cable connected to a standard PC. This function is also used to change
the state of the of display from Imperial to Metric units. (see page 9)
•
MAINTENANCE
Although built for the rigors of underwater use, the DG100 is a preci-
sion tool and should be treated as such. Avoid violent bumps and
drops that could effect the reliability of the gauge. The DG100 is com-
pletely potted and there is very little maintenance involved with the unit.
Do not exceed the maximum depth of 330ft (100M) as this may dam-
age the unit.
O-RING REPLACEMENT
There are two o-rings seated in the battery charging compartment lo-
cated at the back of the DG100. It is recommend that these o-rings get
replaced every 12 to 18 months of use. Please contact RJE Interna-
tional to order these o-rings under part number DG100-02.
SWITCH COVER CLEANNG
Occasionally, the cover over switches “A” and “B” will trap sand and
debris. To clean the switch assembly, remove the switch cover plate by
unscrewing two Allen head screws at the back of the DG100. Remove
plate slowly to ensure that the switch springs do not get lost. Reinstall
the battery cap (to protect the USB connector) and carefully rinse as-
sembly and switch cavity with fresh water. Dry gauge and reassemble.
•
DG100 SPECIFICATIONS
Depth Range
0-330ft (0-100m)
Depth Tolerance
Typically ±2%
Depth Resolution
0.1ft/0.1m
Altitude Compensation
6000ft (1,828m)
Display
Red LED
Dive Timer Tolerance
± 1%
Leg Timer Functions
Start / Pause / Reset
Led Timer Duration
99 hours max
Battery
Rechargeable Lithium Polymer
Battery Life
300 charges
Operational Life
20 hours
TAC-200D Revision 5
3
PREFACE
PROPERTY
The information, descriptions, photos, and illustrations in this manual
are the property of RJE International, Inc. Materials may not be repro-
duced or disseminated without prior written consent of RJE Interna-
tional, Inc.
WARRANTY
RJE International, Inc. warrants the TAC-200D and associated equip-
ment to be free of defects in material and workmanship for a period of
one year from date of delivery to the original purchaser. Obligation
under this warranty is limited to repair or, at the sole discretion of RJE
International, replacement of any product returned to our facility or
authorized distributor. All products shall be shipped to
RJE FREIGHT
PREPAID
and shall be returned to customer
FREIGHT COLLECT
.
Equipment may not be returned without prior authorization which
must be requested in writing. Upon authorization a Case Number will
be issued. The Case Number must appear on the outside of the ship-
ment, as well as, on all pertaining correspondence. Shipments re-
ceived without a Case number will be refused by RJE International.
This warranty does not apply in cases where the product malfunc-
tions as a result of mishandling or improper use.
LIABILITY
RJE International, Inc. assumes no liability for damages, losses, or
cost incurred consequentially through operation or malfunction of any
RJE International, Inc. product.
C
HANGES
RJE International, Inc. reserves the right to make changes in design
or specifications at any time without any obligation to modify previous
units. This manual is provided for information and reference purpose
only and is subject to change without notice.