RIZHAO J&J RV SHELTER 103-1642, Руководство по сборке

Страница: 7 / 15

Top Rails
1.
Start at one side of the back End Bow along the curvature of (3). (11) attaches to (3) on
the inside of this curve. Insert (1) inside (11) and attach to the Middle Bow. Continue
attaching the (1)’s to the Middle Bows and each other until you reach the end. Repeat
these steps on the other side. Do not tighten bolts at this time. The bolts at the end will
need to be removed when installing the Tarp (door) and Tarp (back).
See Figure 5.
2. When this portion of the frame is assembled and free standing, move the assembled
frame to your desired location using several people.
Figure 5
3.
The Top Crests (12) are at the top of the assembled Bows. To anchor that portion of the
roof to the Bows, attach (11) underneath the (12) on the End Bow using Carriage Bolt (15)
and Nut (16). Fit (1) into (11) and connect to the top of the Middle Bow with (15) and (16).
Continue connecting to the top until the last Middle Bow. At the end, connect (1)
underneath the last (12).
See Figure 6
Figure 6
SKU 103-1642 Page 7