RIZHAO J&J RV SHELTER 103-1642, Руководство по сборке

Страница: 11 / 15

TARP COVER INSTRUCTIONS (continued)
2.
Use at least six people to help position the Tarp Cover (23) over the frame. It is suggested
to have a person on a ladder at each end of the frame to assist with lifting. For safety, have
someone to support the ladder so it will not topple over. Use two to four other people to pull
the ropes and shift the Tarp Cover (23) into position. See Figure 10.
3. Center the Tarp Cover (23) over the frame. The internal rope should be in the front and
rear (outside). The punched holes should be positioned on the inside of the RV Shelter.
Center the Tarp Cover on all four sides. See Figure 11.
Figure 11
4. Loosen the four Turnbuckles (20). Tie the ropes loosely to the Turnbuckles (20). Check to
be sure the Cover is still centered and has the same amount of overlap on the front and the
back. See Dwg. in Figure 13.
5. The area where the rope comes out of the Tarp Cover (23) should be about 12” from the
ground. See Figure
12.
Figure 12
12” from
the ground
Rope
Bottom
Rail (8)
SKU 103-1642 Page 11