8
Owner’s manual |
Remedy II
adjustable bed
Installation guide
IMPORTANT!
Make sure power cords do not obstruct any adjustable bed mechanisms.
Installing the mattress retainer bar
Align the open ends of the retainer bar with the “loop” retainer anchors located at
the foot of the bed.
Slide the retainer bar into the anchors allowing the ends to glide into the loop.
1
2
If the adjustable bed is set up without a headboard, place your mattress on the adjustable
bed surface. Your adjustable bed installation is now complete.
If a headboard is to be installed, see “Assembling the headboard bracket.”
Using the bed leg strap (optional)
Line up the two adjustable beds, then use the bed leg strap to wrap the inside legs
together tightly (front leg to front leg and back leg to back leg).
Fasten the straps to prevent movement & maintain stability.
1
2
To help prevent bed separation when using two adjustable beds together, you may use
the bed leg straps.
4
5
Install batteries in the remote control. Try all functions on the remote to make sure
all features are operational.
NOTE:
If the bed does not work, see the Troubleshooting section of this manual.
Return bed to flat position before continuing with the installation.
NOTE:
Make sure your bed is in a flat position before using it. Press the Flat button
on the remote control after plugging in the power cord.