7
7
Installation guide
Attaching the bed legs
IMPORTANT!
Make sure power cords do not obstruct any adjustable bed mechanisms.
Take out all the post bed legs from the accessory box.
Attach the 3" post bed legs to the 6" post bed legs.
NOTE:
If you want to add more height to the adjustable leg, attach the 2" post
bed legs.
Attach the bed legs to the adjustable bed by threading them in a clockwise
direction into the pre-drilled holes on the frame.
NOTE:
Do not overtighten the bed legs.
1
2
3
1
2
Remove and extend the power cord from the adjustable bed.
Rotate the adjustable bed over carefully so the top side is now facing upward.
NOTE:
Do not rest the adjustable bed on its side. The weight may damage the legs.
Plug the power cord into a grounded and working electrical outlet.
NOTE:
For optimal safety, using a surge protector (not included) is highly
recommended.
Setting up the electronics
FOR QUEEN, KING, AND CAL KING MODELS
Plug the cord for the foot lift into the control box. Insert it into the port labeled "Foot
Motor."
3
FOR ALL MODELS