Rize Fixie, Руководство пользователя, Страница: 7 / 20

(A) Handlebar
(required tools: 5mm hex key, 4mm hex key)
1. Fit the handlebar into the stem.
2. Attach the clamp and screw all the bolts, then screw each individually
until securely tight
(recommended torque 6 N.m).
3. Align the handlebar with the front wheel and tighten the two bolts on the
side of the stem
(recommended torque 8 N.m).
(B) Front Wheel
1. Remove the brake pad protector located between the brake
pads .
2. Assemble the wheel by inserting the disc brake rotor between
the brake pads then insert the fork end onto the wheel axle.
3. Remove the nut and spring (A) from the quick release skewer.
4. Insert the quick release skewer with spring (B) pointing inward
into the right side of the wheel axle.
5. Insert spring (A) pointing inward into the left side of the quick
release skewer and tighten the nut.
6. Close the quick release lever and tighten by turning clockwise.
4
© 2021 Rize Bikes
(B)
(A)
3. Remove nut and spring (A)
( The quick release skewer is attached to the wheel )
5. Tighten
6. Close
4. Insert
3 Assembly
3. Tighten
1. Fit the handlebar
2. Tighten