RIX Industries 2PS-15-115, Руководство по эксплуатации

Страница: 15 / 58

RIX Industries 040910-01 Page 6
3.4 Normal Operating Conditions
The table below shows theoretical operating conditions—actual pressures and temperatures may
vary. Due to the inclusion of a back-pressure regulator in the compressor package, the discharge
pressure should always be a minimum of 1500 psig. Do not adjust the back-pressure regulator
setpoint as it keeps the 2
nd
stage floating piston from hitting the 2
nd
stage valve during normal
operation.
Stage Pressure
(psig)
Temperature
(°F)
Suction 25 - 70 70
Interstage 300-600 300
Discharge 1500-2200 225
CAUTION
Cylinder heads and discharge lines are hot. Touching any part of
the cylinder heads or discharge lines can cause burns.
It is recommended that the
Service Log
in the appendix of this manual be used to note operating
pressures, temperatures, and maintenance done at hours of compressor operation. If pressures do
not fall near the above stated values, or vary from your historical pressures, see
Chapter 6 –
Troubleshooting
for corrective action.