11
MSDS
MSDS
Lubricant Details
MOLY GREASE
(
MSC P/N: 60002136
)
Manufacturer:
T.S. Moly-Lubricants, Inc., Houston, TX
Emergency: (713)671-2676
MSDS Number: TS-122 Lithium EP-2 Moly Poly Grease
First Aid:
SKIN:
Prolonged or repeated skin contact with this product tends to
remove skin oils, possibly leading to irritation and dermatitis.
No chronic health problems known.
INGESTION:
May cause irritation and gastrointestinal discomfort consisting of
nausea, vomiting, lethargy and/or diarrhea.
EYES:
Flush eyes with plenty of water for several minutes. Get
medical attention if eye irritation persists.
Fire:
FLASH POINT: 450
°
F/232
°
C
Use water to cool containers exposed to fire. For fires in
enclosed areas, firefighters should use self-contained breathing
apparatus. Avoid fumes or burning product.
Environment:
WASTE DISPOSAL:
Because material uses, transformations, mixtures, processes,
etc. may affect classification, it is the responsibility of the user to
determine the method of disposal according to the latest EPA,
state and local regulations
SPILLAGE:
Recover free product. Add sand, earth, or some other suitable
adsorbent. Keep product out of sewers and watercourses by
diking or impounding.
Handling/ Storage:
Store in cool dry area in original or equivalent container in
accordance with all applicable regulations. Do not apply high
heat or flame to container.
Emhart Approved Equivalents:
None
MOBIL
DTE 32
Manufacturer:
EXXONMOBIL Oil Corp., Fairfax, VA
Emergency: (609)737-4411 (call collect)
MSDS Number: 600684-00
First Aid:
SKIN:
Remove contaminated clothing and shoes and wipe excess
from skin. Flush skin with water, and then wash with soap and
water. If irritation occurs, get medical attention. Do not reuse
clothing until cleaned.
INGESTION:
Do not induce vomiting. In general, no treatment is necessary
unless large quantities of product are ingested. However, get
medical attention.
EYES:
Flush with water. If irritation occurs, get medical attention.
Fire:
FLASH POINT: 345
°
F/174
°
C
Material will float and can be re-ignited on the surface of water.
Use water fog, ‘alcohol foam’, dry chemical or carbon dioxide
(CO
2
) to extinguish flames. Do not use a direct stream of water.
Environment:
WASTE DISPOSAL:
Because material uses, transformations, mixtures, processes,
etc. may affect classification, it is the responsibility of the user to
determine the method of disposal according to the latest EPA,
state and local regulations.
SPILLAGE:
Soak up residue with an absorbent such as clay, sand or other
suitable material. Place in a non-leaking container and seal
tightly for proper disposal. Report spills/releases as required to
appropriate authorities.
Handling:
Wash with soap and water before eating, drinking, smoking,
applying cosmetics, or using toilet. Properly dispose of leather
articles such as shoes or belts that cannot be decontaminated.
Use in a well ventilated area. High pressure injection under the
skin may occur due to the rupture of pressurized lines. Always
seek medical attention.
Storage:
Keep containers closed when not in use. Do not store in open
or unlabelled containers. Store away from strong oxidizing
agents and combustible materials. Do not store near heat,
sparks, flame or strong oxidants.
Emhart Approved Equivalents:
•
Shell Spindle Oil #22
•
Shell Tellus Oil #22
