3
S
AFETY
D
O NOT USE OUTSIDE DEISNG INTENT OR WITH EQUIPMENT THAT IS NOT
RECOMMENDED
BY
THE MANUFACTURER
.
A
LWAYS DISCONNECT THE AIR SUPPLY BEFORE ATTEMPTING ANY MAINTENANCE OR ADJUSTMENT
/
FITTING OF NOSE EQUIPMENT
D
O NOT OPERATE A TOOL THAT IS DIRECTED TOWARDS ANY PERSON
(
S
)
OR WITH THE NOSE PIECES OFF THE TOOL
A
LL MODIFICATIONS CARRIED OUT ON THE TOOL WITHOUT EXPRESS WRITTEN CONSENT OF THE MANUFACTURER SHALL BE DONE
SO AT THE CUSTOMERS
’
SOLE RESPONSIBILITY
R
EFER TO THIS MANUAL BEFORE ATTEMPTING ANY MAINTENANCE OPERATION
.
DO NOT DISASSEMBLE THIS TOOL BEFORE
RFERING TO THIS MANUAL
.
A
VOID EXCESSIVE CONTACT WITH HYDRAULIC OIL
,
AS SOON AS POSSIBLE WASH HANDS THOROUGHLY
D
O NOT EXCEED
6
BAR
/
90
PSI INLET PRESSURE
,
THE USE OF A PRESSURE REGULATOR IS HIGHLY RECOMMENDED
I
NSPECT THE TOOL USING PREVENTITIVE MAINTENANCE TECHNIQUES AT REUGULARLY SCHEDULED INTERVALS
.
INSPECT FOR
DAMAGE AND FUNCTION BY TRAINED COMPETANT PERSONEL
.
THE PLASTIC BODY MUST BE CHANGED WHERNEVER THERE IS
EVIDANEC OF IMPACT DAMAGE
,
CHIPPING
,
OR CRACKING
.
WEAR SAFETY GLASSES AND ADOPT FIRM FOOTING DURING OPERATION
.
S
PECIFICATIONS
The specifications and information contained in this manual are applicable only to the tool with which it was
supplied. Industrial Rivet & Fastener Co reserve the right to make any changes without notice as part of
Industrial Rivet & Fastener Co policy of continuous improvement.
S
PECIFICATIONS
R
IVET
N
UT
T
OOL
Air Pressure
Min/Max
□
5.5 – 6 bar
□
80-90
psi
Free Air Volume Required
@5.5 bar/75psi
□
4.3
liters
□
Содержание RK-280-NP12
Страница 1: ...Instruction Manual RK 280 NP12...
