background image

RIVER QUIVER LOCKED & LOADED

LIMITED LIFETIME WARRANTY

Riversmith takes pride in the products we manufacture and will warrant that all River Quiver 

Rooftop Fly Rod Holders will be free from defects in workmanship and materials for the life of the 

product to the original purchaser (“you”), subject to the below conditions:

• River Quiver was purchased from a Riversmith authorized dealer;

• You can provide proof of purchase from the Riversmith authorized dealer;

• The product was used only as intended and in accordance with the River Quiver installation guide. 

If a defect occurs during intended use (according to the installation guide), we will replace, at our 

discretion, the defective product or part. The warranty does not cover defects caused by misuse, 

overloading, modifications, or improper assembly. Cosmetic damage, loss, theft, normal wear and 

tear, and the natural breakdown of colors and materials over time and use are not warranted. If 

damage is deemed outside of the scope of this warranty, replacement parts will be available at 

discounted prices. 

Warranty Disclaimer:

UNDER NO CIRCUMSTANCES, WHETHER FOR BREACH OF WARRANTY, BREACH OF CONTRACT, 

NEGLIGENCE, OR OTHER TORT, OR ANY STRICT LIABILITY THEORY, WILL RIVERSMITH BE LIABLE 

FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES TO NON-RIVER QUIVER PRODUCTS USED 

IN CONJUNCTION WITH RIVER QUIVER PRODUCTS.

 

The warranty is only available in the United States. No Riversmith reseller, agent, or employee is 

authorized to make any modification, extension, or addition to this warranty.

RIVER QUIVER IS A PRODUCT BY

Содержание River quiver















Отзывы: