Check for parts online at
www.HuntRiversEdge.com
or call 800-450-EDGE (3343) M-F 8-5
7
Operator's Manual
DELUXE Ladder Stand
FIGURE
3
FIGURE
4
8. Slide the flared platform rails (2) into the already assembled
seat side rails (4). Insert two 5/16-18 X 1-3/4 IN bolts (20).
Attach the two support bars (3) to the inside of seat side
rails (4) with the same two 5/16-18 X 1-3/4 IN bolts (20) and
finger tighten with two 5/16 IN nuts (26). SEE FIGURE 4.
9. Attach the top ladder rung (7) to the front of flared rails (2)
using two 5/16 X 18 X 2-1/4 IN bolts (22) and two 5/16 IN
nuts (26). SEE FIGURE 4.
4. Attach the front of the other amrest (11) to the opposite
side rail (4) using one 1/4-20 X 2-1/4 IN bolt (19), one yellow
washer (30) and one 1/4 IN nut (25). SEE FIGURE 3.
5. Attach the rear of armrest (11) and shooting rail “B” (13) to seat
platform (5) using one 1/4-20 X 3 IN bolt (18), yellow washer
(30), polymer washer (29) and 1/4 IN nut (25). Put polymer
washer between armrest and shooting rail "B" and the yellow
washer on the outside of shooting rail "B". SEE FIGURE 3.
6. Slide shooting rail “A” (12) into shooting rail “B” (13) and
secure the assembled shooting rail with one 1/4-20 X 1-1/4
IN bolt (17) and one 1/4 IN nut (25). SEE FIGURE 3.
7. Attach three plastic spacers (28) to both armrests (11) using
two 1/4-20 X 2-3/4 IN bolts (21) and two 1/4 IN nuts (25).
SEE FIGURE 3.
2
4
3
20
26
7
22
26
11
4
18 30
29
13
19
30
25
25
12
17
25
21
25
