Rivers Edge Treestands RELAX WIDE RE664, Руководство оператора

Страница: 11 / 20

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5
11
Operator's Manual
RELAX WIDE Ladder Stand
FIGURE
9
FIGURE
10
18. Attach the stabilizer bar extension tube (12) to the
second ladder section mounting bracket using one
provided spring lock pin (23). SEE FIGURE 9.
19. Slide the stabilizer bar (3) into the extension tube
(12) and attach the two pieces together using one
provided spring lock pin (23). Spring lock pin must
go through both the extension tube and stabilizer
bar at appropriate hole to achieve desired distance
from tree. Adjustment in length may be needed
when ladder is uprighted later in the Setup and Use
Instructions.
SEE FIGURE 9.
NOTE: Treestand should ALWAYS be fully assembled
on the ground prior to mounting it in the tree.
23
12
3
FIGURE
10B
FIGURE
10A
32
32
5
20
. Attach the two long ends of the 16’ criss-cross straps (26)
to the tree blade (5). These long stabilizer straps should
be attached by pulling the free end of the strap through
the loop end of the strap to create a cinch knot around
the frame tube. SEE FIGURE 10A AND 10B.