STEP 1
1. Insert 1 wood screw (F) through hole in magnet plate (H) and tighten to right side door (5).
2. Insert 4 wood screws (F) through holes in 2 hinges (G) and tighten to right side door (5).
3. Repeat above steps to assemble magnet plate (H) and 2 hinges (G) to left side door (6).
STEP 2
1. Insert 4 wood dowels (C) into wood dowel holes on each end of lower cross bar (4).
2. Attach left lower support board (2) to lower cross bar (4) by inserting wood dowels into wood dowel holes on
left lower support board (2).
3. Attach right lower support board (3) to lower cross bar (4) by inserting wood dowels into wood dowel holes on
right lower support board (3).
