23/07/2018_V1.01
Riverlea Group Ltd
P.O. Box 11062, Hamilton 3251, New Zealand
Ph +64 (7) 847 0204, Fx +64 (7) 847 0205
E
-
mail [email protected]
Your Greens HANDIMAN wheelbarrow is guaranteed for 2 years against faulty workmanship and materials only
when used for domestic purposes. The cartage of heavy building materials will render the warranty void. Warran-
ty excludes normal wear and tear and abuse. Manufacturers liability does not cover any colour change or fading
to the tray, handgrips, wheel or tyre that may occur.
Any claims should be made in writing to the address below along with valid proof of purchase receipt. Liability is
limited to the replacement of parts only.
2 YEAR WARRANTY
-
DOMESTIC USE
YOU HAVE NOW COMPLETED THE ASSEMBLY OF YOUR GREENS HANDIMAN BARROW. WE TRUST THIS
PROVIDES YOU WITH YEARS OF PRACTICAL USE.
MANY THANKS
HANDIMAN ASSEMBLY INSTRUCTIONS
Legs
Front Stays
Cross Stays
Hardware Pack
Axle
Wheel
Packed by:
Date:
1.
Place tray upside down on a bench .
2.
Lay handle on tray and push four long gutter bolts from inside tray through tray and handle frame.
3.
Position legs on long bolts and finger tighten nuts.
4.
Attach the cross braces to the rear of the legs with the hexagon head bolts and nuts,
spreading the legs wide
apart to position the cross braces.
5.
To fit wheel, slide axle through wheel centre and slide axle washer and axle spacer over axle on both sides of
wheel (notch on axle spacer should face away from wheel centre). Position wheel inside nose guard of the han-
dle and locate it by placing U
-
blots over axle into holes in handle.
6.
Rotate axle spacers so that notch rests against handle frame.
7.
Fit nuts to rear part of U
-
bolt.
8.
Attach front stays to front of U
-
bolt and finger tighten nuts
9.
Fasten front stays to tray with short gutter bolts from the inside of tray.
10.
Tighten all nuts. Start with U
-
bolts first.
Important
: Only
finger tighten nuts
during assembly. All bolts to have flat washer, then a spring washer fit-
ted before fitting nut.
