Page 21 of 30 20160927-Ver.1
3. If a leak is present, immediately turn off the gas supply and
tighten the leaky fittings.
4. Turn the gas back on and recheck.
5. Should gas continue to leak from any of the fittings, turn off the
gas supply and contact customer service department at (888)
837-1380, 8 a.m. - 5 p.m., Pacific Standard Time, Monday - Friday.
LIGHTING INSTRUCTIONS
BEFORE LIGHTING
WARNING
Inspect the gas supply hose prior to turning the gas
ON
.
If there is evidence of cuts, wear, or abrasion, the hose must be replaced prior to use.
Do not use the appliance if the odor of gas is present.
Only the pressure regulator and hose assembly supplied with the unit should be used.
Perform
the
“
LEAK TEST
” according to the instructions before operating the appliance.
ALWAYS
keep your face and body away from the top opening of main body while lighting.
Seasoning your unit
We suggest to season the unit prior to first use. Apply a light coating of vegetable oil with a paper
towel to the interior walls and turn on high for 1 hour with lid closed.
LIGHTING THE BURNER OF THE APPLIANCE
1. Read instructions before lighting.
2. Open the lid before lighting the burner.
3. Make sure the control knob is in the "
OFF
" position.
4. Turn ON gas valve from cylinder.
5. Push and turn the control knob slowly all the way to
"ON"
until a clicking sound is heard.
Burner should light immediately.
