5
© 2012 Riverbed Technology, Inc.
[root@profiler ~]#
qaucli -fc -g
Using config file: /opt/QLogic_Corporation/QConvergeConsoleCLI/qaucli.cfg
Installation directory: /opt/QLogic_Corporation/QConvergeConsoleCLI
Working dir: /root
--------------------------------------------------------------------------------
Host Name : profiler
OS Type : Linux i686
OS Version : 2.6.32-131.12.1.el6.rvbd.4.i686
FO API Version : 3.0.1 build6
SDM API Version : v6.00 build17
--------------------------------------------------------------------------------
HBA Model QLE2462 (SN LFC0848B98968):
Port 1 WWPN 21-00-00-1B-32-83-38-09 (HBA instance 0)
Online
Port 2 WWPN 21-01-00-1B-32-A3-38-09 (HBA instance 1)
Loop Down
--------------------------------------------------------------------------------
Total QLogic HBA(s) : 1
The assigned LUN is shown by running the following command as root on the Profiler appliance.
[root@profiler ~]#
qaucli -fc -l 0
Using config file: /opt/QLogic_Corporation/QConvergeConsoleCLI/qaucli.cfg
Installation directory: /opt/QLogic_Corporation/QConvergeConsoleCLI
Working dir: /root
--------------------------------------------------------------------------------
HBA Instance 0: QLE2462 Port 1 WWPN
21-00-00-1B-32-83-38-09
PortID 01-06-00
--------------------------------------------------------------------------------
Target WWPN
50-06-01-60-3A-20-22-B2
PortID 01-00-00
------------------------------------------------------------
Product Vendor : DGC
Product ID : RAID 5
Product Revision : 0220
LUN : 0
Size : 100.00 GB
Type : SBC-2 Direct access block device
(e.g., magnetic disk)
OS LUN Name :
/dev/sda
;/dev/sg0;
WWULN :
60-06-01-60-E3-87-1E-00-D8-D8-A4-36-F5-0E-E1-11
------------------------------------------------------------
[root@profiler ~]#
qaucli -fc -l 1
Using config file: /opt/QLogic_Corporation/QConvergeConsoleCLI/qaucli.cfg
Installation directory: /opt/QLogic_Corporation/QConvergeConsoleCLI
Working dir: /root
No fabric attached devices on HBA (Instance 1)!
