3
© 2012 Riverbed Technology, Inc.
3.
Remove a filler panel from the riser assembly.
4.
Insert the SAN card into Slot 1 of the riser board and secure it to the rear of the riser assembly.
Refer to the Slot Map sticker on the top cover of the chassis.
5.
Install the riser assembly back into the chassis. Secure it with the knurled knob at the back of the
chassis and the screw on the forward part of the top.
6.
Reinstall the top cover of the chassis. Secure it with the two knurled knobs on the rear of the
chassis and the screw on the side near the front of the chassis.
