River park XSG2NA-X, Руководство пользователя

Страница: 12 / 33

12
4
Radio Operation
Radio mode can be selected from the Main Menu by pressing the Radio icon on the LCD display. The Radio
mode can be left at any time by pressing the Radio icon at the top left of the Radio screen.
The radio interface contains several buttons that all have
their specific purpose. Below is an explanation of each
button and its functionality.
This button allows the selection between the
FM and AM bands. There are 3 FM and 2 AM
ranges available, all with 6 available presets.
This button allows fine tuning or manual
searching for radio stations.
This button starts automatic searching for the next radio station.
A/S means Auto Store and will store received stations in the memory. Six stations will be stored per
radio band.
P/S means Program Scan and will go through all the frequencies stored in the memory and pauses
for 10 seconds. To stay at a specific station, press the Seek button.
DX is the default mode. When LO is selected, the sensitivity of the radio receiver is reduced so that
only the strongest signals are found when searching. Press the button to switch between DX and
LO.
These six buttons can be used to switch to a radio station in the memory by touching it once or
storing a station by holding it for 2 seconds.
AF means Alternative Frequencies. When this function is activated, the radio will search for other
frequencies on which the same station is present to offer the best reception. The AF button will
blink when activated.
PTY means Program Type. Some radio stations broadcast their program type. When the PTY button
is pressed, use the TUNE and SEEK buttons to select the program type to search and listen to.
POP M ROCK M EASY M LIGHT M CLASSICS OTHER M
JAZZ COUNTRY NATION M OLDIES FOLK M NEWS
AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE
SCIENCE VARIED WEATHER FINANCE CHILDREN SOCIAL
RELIGION PHONE IN TRAVEL LEISURE DOCUMENT
TA means Traffic Announcement and will interrupt any audio source when a traffic announcement
message is relayed from a radio station supporting this functionality. When the volume is set lower
then 10, a TA message will automatically raise the volume to 10.
REG means Regional and this functionality will support the AF functionality by searching for local
broadcasts to improve reception of local radio stations.
Note: The reception and audio quality is highly dependent on the strength of the incoming signal from the radio
broadcasting. When experiencing difficulties with getting a good reception, moving the vehicle to a different
location can improve the audio reception. When problems persist, please contact your dealer for a solution.