Rival CF150 WD, Руководство пользователя

Страница: 6 / 12

-6-
5. When changing the oil, take the opportunity to clean the inside of the fryer.
Remove LID, pour out oil and discard properly; wipe the inside with paper
towels to absorb excess grease. Wash interior of fryer with hot soapy water.
Rinse and dry thoroughly.
CAUTION: Never immerse the fryer in water, or
wash in running water. NOTE: A REMOVABLE CONDENSATION TRAP is
located on the back of the fryer, between the hinges for the REMOVABLE LID.
The CONDENSATION TRAP will collect any water that has condensed on the
inside of the LID when the LID is opened after frying. Remember to empty and
clean the CONDENSATION TRAP after each use. To clean simply rinse with
warm water. The LID must be removed to allow removal of the
CONDENSATION TRAP.
TO REMOVE AND REPLACE LID
To remove lid, depress LID RELEASE BUTTON and lift
LID to a vertical position. Remove LID by pulling firmly
upwards (Fig. 3). Reverse the sequence to secure lid
back into position. Be sure to push down firmly on lid
from vertical position to secure lid back in place. When
replacing LID, verify condensation trap is properly seat-
ed in opening in the housing. The spring on the LID
should be inserted into the opening between slots on
the condensation trap. The male hinge on the lid should
insert into the female hinge on the housing. NOTE:
Always remove LID before emptying the OIL RESERVOIR
or cleaning. CAUTION: Ensure that lid is in place and
secure prior to operation of unit.
Figure 3