-6-
1. Pack ice cream down into ICE CREAM CAN and replace COVER. Put
cork into hole on COVER.
2. Drain off salt water through drain hole in side of BUCKET.
3. Repack ice and salt layers (see “How To Use Your Ice Cream Maker”,
previous section) covering entire ICE CREAM CAN including COVER.
4. Cover the BUCKET with a folded towel or a few newspapers for
insulation and allow to harden for two to three hours. Hardening
time varies with type of ice cream mixture used.
HOME FREEZER METHOD
Ice Cream Can:
1. Pack ice cream down into ICE CREAM CAN and replace COVER. Put
cork into hole on COVER.
2. Place in home freezer for several hours.
Plastic Containers:
1. Spoon ice cream into plastic container; allow
1
/
2
inch for expansion.
Cover with a tight-fitting lid.
2. Place in home freezer for several hours.
HOW TO HARDEN AND RIPEN ICE CREAM
HOW TO CLEAN YOUR ICE CREAM MAKER
MOTOR DRIVE:
Unplug. Never put MOTOR DRIVE in water. Wipe with a
slightly damp cloth. MOTOR DRIVE never needs lubrication.
ICE CREAM CAN, COVER, AND DASHER:
Wash in hot, soapy water. Rinse
and dry thoroughly. Important: ICE CREAM CAN should be towel dried; if
left to “air dry,” water spots may appear. Do not replace COVER until ice
cream can is dry. Do not put any parts in dishwasher.
ICE CREAM BUCKET:
After every use, clean thoroughly to remove salt
water residue.