HD Series
RC6702HD-6311 Installation Guide
05-2014-A
www.rivatech.de
15
4.2. Adjusting angle of the camera
1.
Adjust the camera to the desired angle by unscrewing the joints referring to the following
pictures.
2.
Insert the video output cable(included
in the package) to the video output
cable socket, and connect it to an
analogue video test monitor to check
if the camera angle has been set as
intended. If the angle is appropriate,
disconnect the camera from the
analogue monitor, and then remove
the video output cable from the
camera.
Video Out
Reset
PAL/NTSC
SD Card
Video output cable socket
Adjust the joint to install
the camera on the wall.
Tilting adjustment
Panning adjustment
