13
www.rivatech.de
The camera may fall off the ceiling even after the proper installation
and mounting. To prevent any accident, make sure the ceiling is firm
and stable enough to support the camera. If any reinforcement is
needed, consult with your safety personnel and proceed with the
installation.
4.1. Setting the Image Attribute
You can set the image attribute of camera through the webpage.
The menu of image attribute can be seen under Setup > Video & Audio > Video-in >
Attribute Setting. Brightness, contrast, hue, saturation and sharpness can be
adjusted.
4.2.Operating the OSD Menu
To operate the OSD of camera; refer to the ”OSD Menu Control Manual” in the SDK.
Caution
!
COVER HOLE
COVER LOCK
LOCK HOLDER.2
10
°
LOCK HOLDER.1
COVER
SCREW
(M3.0)
D
E
F
6. Make the wires go through the
square hole.
7. Insert mount holder and twist the
camera counterclockwise.
8. Fix the camera by driving a screw on
lock holder1 and 2.
9. Install the cover by inserting cover
lock and twisting clockwise.
