RC Series
RC362HD-6211IR Installation Guide
04-2017-A
www.rivatech.de
10
4.2. Adjusting angle of camera
Adjust the angle of the camera by manually moving the corresponding parts by reference to
the directions below.
Caution
!
The ambient light sensor shall be uncovered for its normal operation.
Thus, be careful not to make the ambient light sensor hidden by the dome
cover when adjusting the camera angle.
Note
i
Tighten the tilt stopper screw after the angle adjustment is completed.
4.3. Setting the Image Attributes
On the camera’s webpage, users can configure the image settings. The menu of the image
attributes is available at Video Appearance via the path,
Setup > Video > Camera
.
The following attributes can be adjusted: Brightness, Contrast, Saturation and Sharpness.
For more detailed information, refer to Web Page User's Manual.
A. To pan, rotate the panning
part of the gimbal bracket
horizontally.
(The panning range is limited
to 358 degrees.)
Micro SD
Fectory default
SD BOOT
B. To tilt, tilt the gimbal by
reference to the image above.
Micro SD
Fectory default
SD BOOT
Tilt Stopper
Gimbal Bracket
Gimbal
Micro SD
Fectory default
SD BOOT
Inner Liner
C. For the horizontal rotation
of the lens, rotate the inner
liner clockwise or counter-
clockwise.
(The rotating range is limited
to 358 degrees.)