2
www.rivatech.de
Step1. Connect cables to IP device
Connect required cables to the device including the power cable, LAN cable, and other
optional cables. To see the correct positions of all connectors, refer to the following image
below.
Make sure the polarity is correct. Incorrect connection may
cause malfunction or damage to the IP device.
Caution
!
Power Adaptor Connector (DC
12V)
* Models herein and their appearance are subject to change without any prior notice.
LAN Cable
Reset Button
Power Cable
Clamping Core
This uses to prevent
electromagnetic
interference
Clamping Core
*This button is
located under PCB.
PAL, NTSC button
Pressing
the
button
cycles
through PAL, NTSC, and no video
output mode:
No video output ->
PAL->NTSC
.Video out is used only
for installation and works for 3
minutes when PAL/NTSC button
is pushed.
