22
www.rivatech.de
5.3. Reset
1.
Push the Reset button and hold for 1~2 seconds.
2.
Wait for the system to reboot.
5.4. Factory Default
If you reset your device to the factory default setting, all parameters including the IP
address will be initialized.
To proceed back to the Factory Default reset:
1.
While the device is on, press reset button and hold.
2.
Release the Reset button after about 5 seconds when green LED blinks at rate of
200ms.
3. Wait for the system to reboot
Alternative you can reset the device to the factory default settings, via webpage menu:
1.
Access the device’s webpage
2.
From Setup page, go to Maintenance > Reset All Settings.
3.
Press the ‘Reset All Settings’ button. Click OK when popup message “
Do you want to
reset all settings?
” appears.
4.
After few seconds of loading, another popup message appears, asking the user to
reboot the system. Click OK.
5.
Click “Start Reboot” button and click “OK” when verification message appears.
6.
Wait for the system to reboot.
