Riva FP, Инструкция по установке и эксплуатации

Страница: 8 / 48

8 RIVA FP MANUAL
1. General Information
2. Technical Information (M130.30CM)
The Riva FP is a high ef fi ciency, non-condensing, wall mounted gas boiler which provides cen-
tral heat. The boiler features a gas valve which modulates the energy input from 49,476 BTU/h
to 122,837 BTU/h. The boiler is shipped fully assembled with the components listed on page
10. All units are pressure and combustion tested at the factory prior to shipping.
• Wall mountable - saving valuable fl oor
space.
• Several fl ue options available
• Electronic spark ignition
• Safety
fl ow switch - positioned on the
main circuit, which monitors the fl ow and
protects the main heat exchanger from
thermal shock should there be a lack of
water in the system.
• Frost protection - contains an integral frost
protection system to prevent frost dam-
age which can occur in areas susceptible
to very cold weather conditions.
• Boiler operation recognition system -
should the boiler not be used for longer
than 24 hours, it then performs a control-
led system test to ensuring the motorized
components within the boiler do not be-
come inoperable due to lack of use.
• Gas valve modulation - the gas input
modulates based off central heating and
domestic hot water temperature to within
± 2 ºF
• Diagnostic information system equipped
with three LED diagnostic lights for quick
error assessment.
GENERAL
Height in 27.7
Width in 15.7
Depth in 12.8
Weight lb 78.7
ELECTRICAL
Voltage V 120
Frequency Hz 60
Current A 1.6
Power consumption W 180
INJECTORS No. Size
Natural 14 130
Propane 14 89
CENTRAL HEATING
Maximum working temp. °F 185
Temp. Regulation range* °F 100-176
Maximum pressure psi 30.0
Minimum pressure psi 4.35
Max head loss (at 4.4 GPM) ft 9.9
*At the minimum useful output