7
www.riukoe.com PL-WT0096-IP65 9x12W Battery Wireless Par User Manual
Use the original packaging and materials to transport the fixture in for
service.
DO NOT TOUCH
the housing bare-hand during its operation. Turn OFF
the power and allow approximately 15 minutes for the fixture to cool down
before replacing or serving.
INSTALLATION:
C A U T I O N S
For added protection, mount the fixture in areas outside walking paths,
seating areas, or in areas were unauthorized personnel might reach the
fixture.
Min/Max ambient operating temperature for this fixture is 5°F to 113°F
(-15°C to 45°C). Do not use the fixture under or above this temperature.
Before mounting the fixture to any surface, make sure the installation
area can hold a minimum point load of 10 times the weight of the fixture.
210 lbs / 95 kg)
Fixture installation must always be secured with a secondary safety
attachment, such as an appropriate safety cable.
Never stand directly below the device when mounting, removing or
servicing.
Ensure ALL connections and end caps are properly sealed with a
dielectric grease (available at most electrical suppliers) to prevent
