Page 3
2. Conditions of use / safety instructions
–
The CMC-TC ISDN Unit must be used exclusively for the Rittal CMC-TC system.
–
The following documents apply: the operating / safety instructions for the
processing unit (7320.100) and these product-specific instructions. In particular,
the conditions of use, safety instructions and warranties listed in these documents
must be observed.
–
It is imperative that all leads are connected separately from cables carrying the
supply voltage.
–
The CMC-TC ISDN unit must be used exclusively within the specified
environmental limits.
–
The CMC-TC ISDN unit must not be opened. The unit does not contain any parts
that need servicing.
–
Before connecting the CMC-TC ISDN unit, make sure that it is suitable for the
processing unit.
–
Safety devices must not be deactivated.
–
It is imperative that the CMC-TC ISDN unit does not come into direct contact with
water (e.g. dew), oil, or aggressive substances.
–
The unit must not be operated in environments with flammable gases or vapours.
The unit must be installed in an enclosure to protect it from water and dust.
–
There must be no voltage across the CMC-TC system when the CMC-TC ISDN
unit is connected to the PU.
–
The CMC-TC ISDN unit must be properly installed in accordance with the
separate installation instructions.
–
The conditions of use / safety instructions listed in the instructions must be
observed.
–
All warranty claims on the grounds of damage become void when this damage is
incurred by failure to observe these instructions / conditions of use or the
instructions for the processing unit 7320.100. Rittal assumes no liability for
consequential damage!
–
Rittal assumes no liability for any damage to property or bodily injury incurred by
improper use or failure to observe the safety instructions. Every warranty claim
becomes void in such cases!
