Ritron OUTPOST RQX-451 XT, Руководство пользователя

Страница: 17 / 21

1 Series OUTPOST
®
Wireless Callbox Field Programming
Have questions? Call 800-USA-1-USA (800-872-1872) or visit our website at www.ritron.com
15
T
ABLE
5: A
DVANCED
F
EATURE
C
ODES
....................................................
Code Feature Default Description
RQX Reset Time
801 5 seconds RQX Reset Time is the length of time the RQX Callbox can remain
802 10 seconds
√
inactive (not receiving or transmitting) before it automatically shuts off.
803 20 seconds
804 30 seconds
805 45 seconds
806 1 minute
807 2 minutes
808 3 minutes
809 4 minutes
Special Features
821 Reset to Factory Defaults Resets Callbox to Factory default programming.
822 Display Radio Revision Callbox will display a sequence of 6 digits to identify operating code
revision. This is helpful when troubleshooting the radio.
823 Enable ExV Enables the ExV “Loss of power” notification feature.
824 Disable ExV
√
Disables the ExV “Loss of power” notification and reverts back to
“Low Battery” notification.
825 Enable Auto Turn-Off
√
Callbox will automatically turn off when it has not been used (transmit or
receive) for a period of time longer than the RQX Reset Time.
826 Disable Auto Turn-Off Callbox will remain on at all times. This mode of operation is not
recommended for battery-powered applications.
827 Enable Busy Channel TX Inhibit Callbox cannot transmit when there is a received signal. A “busy signal”
will be heard on the Callbox speaker when the PTT is pressed and a
received signal is present.
828 Disable Busy Channel TX Inhibit
√
Callbox will transmit whenever the PTT is pressed, regardless of any
received signal.
829 Mic Gain High Places the microphone into high gain operation where quiet and distant
voices will be heard. This mode of operation will increase background
noise transmitted by the Callbox.
820 Mic Gain Normal
√
Places the microphone into normal gain operation for the majority of
applications where the user is talking directly into the Callbox. This mode
of operation will decrease background noise transmitted by the Callbox.
Receive Volume Level
875 10% Sets the speaker volume level of received signals.
876 25%
877 50% *
√
878 75%
879 100% *
√
The Callbox is set from the factory with these options enabled .
* Setting is also available with Single-Digit Radio Feature Code programming.