7 Series OUTPOST
®
Wireless Callbox
Field Programming
Have questions?
Call 800-USA-1-USA
(800-872-1872) or visit our website at
www.ritron.com
T
ABLE
6:
A
DVANCED
F
EATURE
C
ODES
(
CONTINUED
)
...................................
Code
Feature
Default
Description
Switch Operation
811
No Switch *
√
Disables 2-Tone decode and all switch operation
.
812
Switch On When Called
Switch closes (e.g. strobe light turns on) when Callbox 1
st
receives a call. Switch
opens (e.g. stobe light turns off) as soon as the PTT is pressed. Enabling this feature
will disable 2-Tone decode.
813
Switch On When Active
Switch is closed (e.g. strobe light turns on) as long as Callbox is in use. Switch opens
(e.g. stobe light turns off) when Callbox has not been used (transmit or receive) for a
period of time longer than RQX Reset Time. Enabling this feature will disable 2-Tone
decode.
814
GateGuard
®
Momentary *
Switch is closed for 1 second when correct 2-Tone Decode Code is received.
Enabling this feature will disable any previously programmed 2-Tone decode operation
and require re-entry of the 2-Tone Decode Code before it can operate.
815
GateGuard
®
Toggle
Switch alternately closes and opens when correct 2-Tone Decode Code is received.
Enabling this feature will disable any previously programmed 2-Tone decode operation
and require re-entry of the 2-Tone Decode Code before it can operate.
Special Features
821
Reset to Factory Defaults
Resets Callbox to Factory default programming.
822
Display Radio Revision
Callbox will display a sequence of 6 digits to identify operating code revision. This is
helpful when troubleshooting the radio.
823
Enable Ex12 VDC
Enables the Ex12 VDC “Loss of power” notification feature.
824
Disable Ex12 VDC
√
Disables the Ex12 VDC “Loss of power” notification and reverts back to “Low
Battery” notification.
825
Enable Auto Turn-Off
√
Callbox will automatically turn off when it has not been used (transmit or receive) for a
period of time longer than the RQX Reset Time.
826
Disable Auto Turn-Off
Callbox will remain on at all times. This mode of operation is not recommended for
battery-powered applications.
827
Enable Busy Channel TX Inhibit
Callbox cannot transmit when there is a received signal. A “busy signal” will be heard
on the Callbox speaker when the PTT is pressed and a received signal is present.
828
Disable Busy Channel TX Inhibit
√
Callbox will transmit whenever the PTT is pressed, regardless of any received signal.
829
Mic Gain High
Places the microphone into high gain operation where quiet and distant voices will be
heard. This mode of operation will increase background noise transmitted by the
Callbox.
820
Mic Gain Normal
√
Places the microphone into normal gain operation for the majority of applications
where the user is talking directly into the Callbox. This mode of operation will
decrease background noise transmitted by the Callbox.
Listen In Time
870
Listen In Off
√
The Callbox will automatically transmit for a period of time equal to the
871
Listen In 5 seconds
Listen In Time when the correct 2-Tone decode code is received.
872
Listen In 10 seconds
Programming Listen In Time will disable any previously programmed 2-
873
Listen In 20 seconds
Tone decode operation and require re-entry of the 2-Tone Decode Code
874
Listen In 30 seconds
before it can operate.
Receive Volume Level
875
10%
Sets the speaker volume level of received signals.
876
25%
877
50% *
√
878
75%
879 100%
*
√
The Callbox is set from the factory with these options
enabled
.
*
Setting is also available via Single-Digit Radio Feature Code programming.
16
