3
Programming
For most installations the LPA-Series receiver can be programmed in the field
without the need for Ritron PC Programmer 12.0.1. Field programming is
accomplished in 3 easy steps. First, the radio frequency and tone codes are
entered. Second, the selective signaling code is entered (if used). Third, the LPA-
Series options and volume setting are entered.
3.1
LPA-Series Field Programming Overview
Press
ENTER
Section 3
Programming
11
Program
odes
C
Table
Codes
Enter a 2-digit Frequency code from Table 1
and
a 2-digit QC code from Table 2
or
nter a 2-digit Frequency code from Table 1
and
a 3-digit DQC code from Table 3.
E
or
Enter a 2-digit, 2-Tone Paging code from Table 4
Enter any 3 – digit Selcall Paging Code.
7-
E
r
nte a 2-digit Feature code from Table 5 to:
•
Enable or disable a Pre-Announce Tone.
•
Enable or disable Record and Play operation.
•
Enable or disable Weather Alert feature (VHF models only)
•
Reset LPA-Series receiver to Factory default programming.
Enter the desired Speaker Volume Level as a 2 –digit number from 05 – 99.
Enter the 1-digit NOAA Weather Frequency code from Table 6 (
VHF models only
)
This only programs the NOAA weather frequency, the Weather Alert feature must be enabled using
the Special Features code in Table 5.
Place the
LPA-Series
receiver
into
Program
mode.
Use
PROGRAM
button to scroll to
one of the following
Program Code
characters:
[F], [C], [A], [U], [d]
Pause
, a
hyphen
will
appear
on the
display.
Using the
PROGRAM
button to save
programming entry.
button,
enter the
desired
Table Code.
Press
ENTER
button a second
time to Exit programming.
or
Proceed with next program entry.
Содержание LPA-V150
Страница 2: ......
