Ritron LoudMouth LM-600Analog, Руководство пользователя

Страница: 26 / 39

Section 3 Programming 24
3.7
Readout and Field Program Loudmouth
®
Speaker Volume
The wireless speaker can be field programmed for any volume level between 05-99% by entering the volume level as a 2-digit code.
Field programming Speaker Volume Level sets the voice volume levels.
In our example we will program the radio for 25% Speaker Volume Level. The Loudmouth
®
is set from the factory with a 50%
volume setting .
To enter the Volume setting:
1. Refer to Section 1.5 - Determine the volume setting and write down the desired volume.
2. Place the radio into Program / Readout Mode by pressing and holding the PROGRAM
button. A “P” will
appear on the display. Release the PROGRAM button when a hyphen appears and the radio is ready to
accept the first digit of your program entry.
3. Scroll to the characte
r “U” by clicking the
PROGRAM button until the program display shows the correct
character. Pause
—the radio will show a hyphen across the center of the display to indicate that it is ready to
accept the first digit of the volume setting.
4. Enter the 1
st
digit of the volume setting by clicking the PROGRAM button until the program display shows the
desired number. Pause
—the radio will show a hyphen across the center of the display to indicate that it is
ready to accept the next digit.
5. Enter the 2
nd
digit of the volume setting by clicking the PROGRAM button until the program display shows the
desired number. Pause
—the radio will show a hyphen across the center of the display to indicate that it is
ready to accept the next digit.
6. Press and release the ENTER button to save your programming. A hyphen will flash 3 times on the program
display to indicate that programming was successful. The radio is now ready for another program entry.
NOTE: If you attempt to save an incorrect code, an "E" will appear on the display. Check the digits you are
attempting to enter, then re-enter.
7. Press the PROGRAM button to continue programming, or press the ENTER button to exit program mode.
IMPORTANT NOTE: Volume setting below 10% are entered as a 2-digit code
with a first digit “0”.
To readout the Volume setting:
1. With the radio in program mode, click the PROGRAM button until the program display shows the Program Code
“U”. Pause—the radio will show a hyphen across the center of the display to indicate that it is ready to readout the
Volume setting.
2. Press and release the ENTER button. The display will show the 2-digit Volume setting, followed by a hyphen.
VOLUME SETTING 25%
3. Press the PROGRAM button to continue programming, or press the ENTER button to exit program mode.
25
SPEA
K
ER
VO
L
U
ME