Section 3
Programming
17
4. Press and release the
ENTER
button to save your programming. A hyphen will flash 3 times on the program
display to indicate that programming was successful. The radio is now ready for another program entry.
NOTE:
If you attempt to save an incorrect code an "E" will appear on the display. Check the digits you are
attempting to enter, then re-enter.
5. Press the
PROGRAM
button to continue programming, or press the
ENTER
button to exit program mode.
To readout frequency programming:
1. With the radio in program mode, click the
PROGRAM
button until the program display shows the Program
Code “F”. Pause—the radio will show a hyphen across the center of the display to indicate that it is ready to
readout the Frequency programming.
2. Press and release the
ENTER
button. The display will show the Section number of
Table F
, followed by the 2
or 3-digit frequency code. Each digit is separated by a hyphen.
SECTION FREQUENCY CODE
If the radio frequency has been entered without using the Programmable Frequency Table, the display will
show Section number 1 followed by the 8-digit frequency.
SECTION FREQUENCY (Example 467.8500MHz)
3. Press the
PROGRAM
button to continue programming, or press the
ENTER
button to exit program mode.
