PG
8
PG
7
5 Install Batteries cont
• Replace front of control unit on the
wall unit
6 Check Unit
8045 Features
Follow these procedures to verify
you have correctly installed the
unit.
•
To check HEAT mode:
•
Set the mode switch to HEAT.
•
Turn TEMP DIAL counter clockwise to its stop.
This is the warmest setting. Allow the system 5
min to respond. Verify that heat is coming from
the system.
• Return dial to comfortable setting.
The 8045 can be used with
most 110/220 volt electric
heating devices. It provides
Line voltage control for
radiant cable, electric
baseboard, and resistive-
rated fan forced heaters
within the ratings listed.
Electrical Rating -
120/208/240 Vac;
16A resistive load
