14
5. Check the device to be powered is within the maximum constraints of the RITE-POWER 615, see
technical specifications contained within this manual and on the RITE-POWER 615. Heed the notes
in the section Applications and Restrictions of use with regard to Inductive, Resistive and capacitive
loads and their limitations.
6. Once everything is connected press the power
on button. The display will light up and a red LED
should light in the middle of the switch to indicate
that mains power is on and everything is ok.
7. Note the estimated run time on the display, this
will vary according to the load driven by
the RITE-POWER 615. In the example here the
display indicates 6 hours, 35 minutes remaining at
the current power drawn.
SYSTEM ENERGY MONITOR KEY
1. State of charge
2. Battery voltage (V)
3. Current draw (A)
4. Wattage (W)
5. Estimated run / recharge time
6. Battery capacity (Ah)
The display also shows various other parameters such as wattage, this can be a useful gauge to
understand what different powers are consumed by different equipment and the runtime that might
be expected.
6
5
4
3
2
1
