manualshive.com logo in svg

RITE-HITE SlideAir, Инструкция по установке/обслуживанию/эксплуатации, Страница: 6 / 24

Поделиться
Скачать
RITE-HITE SlideAir Скачать руководство пользователя страница 6

SlideAir™ Pneumatic Safety Curtain 

Installation/Service/Owner's Manual

 Rite‑Hite

®

6 Publication: 

AMEN00119 2020-07-06

INSTALLATION
Preparation 

Continued

Parts Inventory

1  Remove all assemblies and parts from the shipping 

container

2  Arrange parts on the floor using the exploded view as 

a guide, see

 

"PARTS" on page 19

3  Check to insure all parts are included Call technical 

support if you have any questions

Header Assembly

The header assembly includes the aluminum extrusion 

structure, rodless cylinder, curtain trolleys, proximity 

switch(es) (optional), and air hose The cylinder pulls  

the curtain open or closed across the opening when  

air is supplied

Curtain

The standard curtain is made of either opaque or 

translucent material Standard 8 in (203 mm) pleats allow 

the curtain to fold back to a compact profile when 

 

not needed

Vertical Supports (Optional)

The vertical supports are rugged 3 in (76 mm) square 

tubing Brackets allow easy assembly of the cylinder 

assembly to the vertical supports
Dual vertical supports will be mounted on 8 in (203 mm) 

square plates
A single pedestal support (A) 

"Figure 1" on page 7

 

will be mounted on 16 in (406 mm) square plates to 

compensate for the hanging load

Junction Box Assembly (Optional)

The Junction box assembly includes a four way air 

control valve, and the necessary terminal blocks to easily 

incorporate an output signal from the existing machine 

controller The four way valve is available as 24 VDC or 

110 VAC

Control Box Assembly (Optional)

The control box assembly includes a four way air control 

valve, open, close and stop push buttons, and (2) 24 VDC 

relays This control box allows the SlideAir to be opened 

or closed by momentarily pushing a button, or from a 

24 VDC output signal from a machine controller This box 

requires use of a 110 VAC air valve

Содержание SlideAir

























Отзывы:

Нет отзывов