RITE-HITE RHH-5000, Руководство пользователя

Страница: 9 / 40

NOTES :
a. If the lip extended too far, quickly push and release the
RAISE button to slightly retract the lip.
b. If the lip was not extended far enough and hits the lip supports,
repeat this step allowing the lip to extend farther.
3. For units with Safe-T-Lip
®
, if equipped, pull and hold the End
Load Leg Chain as the leveler lowers for below dock end loads.
See figure 7. DO NOT pull chain for dock level end loads.
4. When loading/unloading is complete, continue with normal
operation or return the leveler to stored position. See Storing
Leveler.
STORING LEVELER
1. To store the leveler, push and hold the RAISE button until leveler
is about 6 inches above dock level and lip is fully pendant.
2. Release RAISE button. Leveler will lower to dock level with lip
resting in the lip supports. See figure 8.
NOTE: On Powered levelers with Automatic Return to Dock
(ARTD). If the lip is on the truck/trailer and the truck departs, the
leveler will move to its lowest position and the lip will begin to
lower. As the lip drops toward the pendant position, the ARTD
system automatically returns the leveler to the stored position
without operator assistance.
FIGURE 7 - END LOAD OPERATION
(EQUIPPED WITH SAFETY LEGS)
End Load Leg
Chain
FIGURE 8 - LEVELER STORED
OPERATION
Rite‑Hite
®
Owner’s Manual
RHH‑5000 High Capacity Dock Leveler
Publication: AMEN00206 2020-02-04 9