SAFETY
General
Continued
Never be under the dock leveler platform or lip without:
• Installing the Safe-T-Strut
TM
. See below right.
This can be done with the assistance of another
person by:
- Raise leveler until platform reaches its highest
position and lip extends.
Continue to maintain this position.
- Then have assistant insert the smaller end of the
Safe-T-Strut
TM
through the hole in the middle of the
leveler lip and place the strut’s wider open end over
the base located on the leveler’s front frame. Align
the holes on the base and the Safe-T-Strut
TM
so that
the leveler may be secured with the retaining pin
and safety clip.
- Release the pushbutton on powered levelers
allowing the Safe-T-Strut
TM
to rest on the underside
of the lip.
• Lockout/Tagout power supply.
- Turn off the power to the control box.
- Lockout/tagout the main power source, as shown
under Safety Warnings on the inside front cover of
this manual.
- Always barricade the leveler at dock level and drive
level to prevent any unauthorized use of the leveler.
Remove the Maintenance Support.
• For Safe-T-Strut
TM
removal, have an assistant raise the
leveler to its highest position with lip fully extended.
Release the safety clip and remove retaining pin. Lift
strut off base, and remove from lip. Return the
Safe-T-Strut
TM
to the proper storage position.
• If you are unable to install the Maintenance Support
properly, contact your authorized Rite-Hite
Service
Representative or Rite-Hite Customer Service at
1-414-355-2600.
FIGURE 2 - INSTALL SAFE-T-STRUT
TM
SUPPORT
Rite‑Hite
®
Owner’s Manual
RHH‑5000 High Capacity Dock Leveler
Publication:
AMEN00206 2020-02-04
5
Содержание RHH-5000
Страница 7: ...Rite Hite Owner s Manual RHH 5000 High Capacity Dock Leveler Publication AMEN00206 2020 02 04 7 ...
Страница 17: ...Rite Hite Owner s Manual RHH 5000 High Capacity Dock Leveler Publication AMEN00206 2020 02 04 17 ...
Страница 28: ...RHH 5000 High Capacity Dock Leveler Owner s Manual Rite Hite 28 Publication AMEN00206 2020 02 04 ...