2 Publication:
AMEN00064 2019‑03‑07
Revolution
®
HVLS Fan • Rogue
®
HVLS Fan
Installation/Service/Owner's Manual
Rite‑Hite
®
NOTICE TO USER
READ AND SAVE THESE INSTRUCTIONS.
Thank you for purchasing a Rite‑Hite product
The Revolution and Rogue Fans are high‑volume/low‑speed
(HV/LS) industrial fans that provide more consistent air
circulation and ventilation with better energy efficiency than
traditional high-speed ceiling fans or industrial floor fans.
The English version of this manual shall prevail over any
error in, or conflicting interpretation of, any translations.
Rite‑Hite reserves the right to substitute and/or modify
parts and drawings (electrical and architectural) from
those contained in this manual Separate prints may be
included with the unit
For best results, have this product serviced by an
authorized Rite‑Hite representative
A Planned Maintenance Program (PMP), customized
to your specific operation is available and recommended.
For a PMP, contact your local Rite‑Hite representative
or Rite‑Hite technical support at (US) 888‑456‑3625
or 1‑414‑973‑3625, (SA) +55 21 99616 4421,
(EU) +49‑5693 98700
The Rite‑Hite
®
products in this manual are covered by one or more of
the following US patents: 7658232, 8622712, 8142156, D631536,
7726945 and may be covered by additional pending US and foreign
patent applications
Manufactured by Rite‑Hite Engineered Solutions Group, Inc
FCC Compliance
NOTE:
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC Rules
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense
NOTE:
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment
Contains FCC ID: MCQ‑XB900HP
Contains IC: 1846A‑XB900HP
This device complies with Part 15 of the FCC Rules
Operation is subject to the following two conditions:
1 This device may not cause harmful interference
2 This device must accept any interference received, including
interference that may cause undesirable operation
SAFETY
Safety Identifications
!
DANGER
Indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
Indique une situation dangereuse qui, si elle n’est
pas évitée, peut entraîner la mort ou de graves
blessures.
WARNING / AVERTISSEMENT
Indicates a hazardous situation which, if not
avoided,
could result in death or serious injury
.
Indique une situation dangereuse qui, si elle n’est
pas évitée,
peut entraîner la mort ou des blessures
graves
.
!
CAUTION / ATTENTION
Indicates a hazardous situation which, if not
avoided,
could result in minor or moderate injury
.
Indique une situation dangereuse qui, si elle n’est
pas évitée,
peut entraîner des blessures légères à
modérées
.
NOTICE
Indicates a situation which can cause damage to the
equipment, personal property and/or the environment,
or cause the equipment to operate improperly
NOTE:
A note is used to inform you of important
installation, operation, or maintenance information
