manualshive.com logo in svg

Ritchie Cook 1421, Инструкция по эксплуатации и руководство пользователя

Поделиться
Скачать
Ritchie Cook 1421 Скачать руководство пользователя страница 5

5

Warranty

The machine should be checked over at time
of delivery for transport damage. Check also
that the specification is complete and that the
data plate contains the serial number of the
machine. All claims must be delivered to the
manufacturer in written form within 48 hours.

David Ritchie Implements Ltd. guarantee
subject to certain conditions that the goods
supplied will be free of defects both in material
and workmanship.

The following conditions apply:-

• The machine should only be used for the

purpose indicated in this manual.

• Service and warranty work is carried out only

by authorised Ritchie dealers.

• The original specification of the machine has

not been subject to unauthorised
modification.

Correct operation of the machine and regular
maintenance will help to prevent breakdowns.
If however operating trouble is experienced
during the warranty period the following
actions should be adopted:-

Notify the dealer immediately from whom the
machine was purchased, quoting the model
and serial number.

Do not operated the machine. Damage
resulting from failure to report a fault may
not be covered by warranty.

The manufacturer cannot accept liability for
damage to machines or third party through
operational negligence.

Intended Use

The 

Cook ‘Automatic’ Bale Accumulator

model 1421

, is designed to work behind most

modern balers, where bale sizes are 14” - 16”
high and 18” or 19” wide. Bales should be in
the region of 36” in length and not more than
42”.
The Bale Accumulator is attached to the Bale
Chamber to accept bales via a front chute.
Each bale is guided through the Accumulator
until 2 rows of 4 bales have been formed. They
are then released automatically behind the
machine ready for handling with the ‘Ritchie
Flat Eight Grab’.

The machine is designed to be used by a single
operator only (tractor driver).

Inappropriate Use

The machine must not be used for purposes
other than those indicated in this manual.

Содержание Cook 1421





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды