Ritchie Cook 1421, Инструкция по эксплуатации и руководство пользователя

Страница: 12 / 20

12
Setting Up and Adjustment
On arrival in the field transfer the drawbar
from the side position to the (centre) working
position, Fig 7.
Set the baler to produce bales of the required
length, preferably 36”, and not more than
42”.
Transfer Gate trip adjustment
Most Balers make bales which are 14” high,
with some producing bales at 16” high.
Set the Transfer Gate trip adjustment
according to the height of the bales to be
gathered.
It is important that the trip rod is fastened in
the upper hole on the trip lever for bales which
are 16” high and in the lower hole for 14”
high bales, Fig 8.
Bale Guide Supports - Spacers
If working with 19” wide bales it is necessary
to remove the RHS spacer blocks - fitted to
the Bale Guide Supports to both left and right
hand sides of the machine (behind the rear
wheels), Fig 9.
The spacers can be re-attached until needed
again on the outside of the Bale Guide
Supports as shown, Fig 10.
Upper Hole
for 16” bales
Lower Hole
for 14” bales
Fig 8
Fig 9
Fig 10
Remove Spacer when
working with 19” wide bales
Re-fit Spacer in storage
position for future use