Riso Perfect Binder G10 120 Скачать руководство пользователя страница 21

Страница: 21 / 78

Perfect Binding

Perfect Binder User’s Guide

■

Linkage with the printer

The Perfect Binder's status changes to the following, according to the printer's status.

* This can be configured with "Perfect Binder Settings" (p. 1-11).

Terms of the Status of the Perfect Binder

Term

Description

Printer

Printers which can be connected to the Perfect Binder (ComColor GD series)

Glue heater

Heater which warms up the temperature of the glue to 180 °C and the glue tank
to 155 °C

Warming up mode

Status that the glue heater warms up the glue and glue tank to the suitable
temperature

Stand-by mode

Status that the glue and glue tank is the suitable temperature so that the unit is
ready for binding

Cooling down mode

Status that the glue heater runs at the lower temperature to prevent the
deterioration of the glue

Sleep mode

A status where the heating of the glue heater has been stopped to suppress
the power consumption of the Perfect Binder

Printer

Perfect Binder

• The power for operating is turned on
• Recovery from the power-saving mode

Starts in the "warming up mode" or "sleep mode",
according to the "Admin Menu Settings"*

• Power saving mode

Backlight off
Power consumption (in sleep) (Standard)

The unit will enter the sleep mode.

• The power for operating is turned off
• Power saving mode

Power consumption (in sleep) (Low)

The power turns off.

Содержание Perfect Binder G10 120














































































Результаты поиска

Содержание Perfect Binder G10 120

Отзывы:

Похожие инструкции для Perfect Binder G10 120

Бренды по названию

Популярные бренды

Riso Perfect Binder G10 120, Руководство пользователя

Результаты поиска

Содержание Perfect Binder G10 120

Отзывы:

Похожие инструкции для Perfect Binder G10 120

Бренды по названию

Популярные бренды