Riso CV1860 Series, Техническое руководство, Страница: 209 / 243

14 - 16 CZ180 / CV1860 Rev. 1.0
CHAPTER 14: TEST MODE
0943
Inking time adjustment (In normal printing)
Description
Sets the timer for the Replace Ink Bottle message to come out after the Ink sensor stops
detecting the ink bead in the Drum.
Setting
Range : 1 to 60 (1 second to 60 seconds)
Unit : 1 (1 second)
Default : 15 (15 seconds)
0944
Inking time adjustment (Right after replacing the ink bottle)
Description
Sets the timer for the Replace Ink Bottle message to come out after the Ink sensor stops
detecting the ink bead in the Drum.
Setting
Range : 5 to 60 (5 seconds to 60 seconds)
Unit : 1 (1 second)
Default : 30 (30 seconds)
0945
Ink overflow detection frequency adjustment
Description
Sets the number of detection times for the overflow sensor to determine that an ink overflow
has occurred in the print drum.
Setting
Range : 1 to 200 (1 time to 200 times)
Unit : 1 (1 time)
Default : 50 (50 times)
0952
Clamp unit hope position stop timing adjustment.
Description
Sets the Clamp motor [stop] timing when the Clamp sensor status changes from OFF to ON
and then finally to OFF.
Setting
Range : 0 to 400 (0 milisecond to 400 miliseconds)
Unit : 10 (10 miliseconds)
Default : 200 (200 miliseconds)
0953
Clamp unit clamp-plate-open-action-position stop timing adjustment
Description Sets the Clamp motor [stop] timing when the Clamp sensor status changes from OFF to ON.
Setting
Range : 350 to 950 (350 milisecond to 950 miliseconds)
Unit : 10 (10 miliseconds)
Default : 550 (550 miliseconds)
0970
Vertical print position HP adjustment.
Description Sets the HP (center) position of the vertical print position.
Setting
Range : -50 to +50 (-5.0 mm to +5.0 mm)
(+ values move the printed image up)
Unit : 1 (0.1 mm)
Default : 0 (0 mm)
RISO Inc. Technical Services & Support US.RISO.COM