Riso ComColorExpress IS700C, Руководство по установке

Страница: 40 / 68

Setup and Installation of the ComColorExpress IS700C
Installing on Windows (Windows 2000/XP/Windows Server 2003)
38
5
Select the components you want to
install, and click the [Next] button.
• Printer driver
This is the printer driver installer for the IS700C.
Run this when installing the printer driver.
• SMAP
This software enables you to drag and drop files
into the output destination queue and directly
execute printing.
Place a checkmark in
[SMAP] if you want to
use the SMAP.
• RISO Management Tool
This software enables you to set the IP address for
the IS700C, and also enables you to perform the
monitoring and wake-up processes for the IS700C.
Place a checkmark in
[RISO Management Tool] if
you want to use the RISO Management Tool.
Confirm the IP address with your network
administrator.
• Manuals
These are manuals for the IS700C.
6
Confirm the destination for installa-
tion, and click the [Next] button.
Note:
• If you want to change the destination folder for
installation, click the [Browse] button and
specify a folder.
7
Click the [Install] button.
Installation begins.
8
Complete the installation.
When the dialog box below is displayed, click the
[Finish] button, and complete the installation.
Note:
• If there is a checkmark in [Run PrinterIn-
staller] , the Printer Installer will start.
If network settings for the IS700C have not
been completed, remove the checkmark in
[Run PrinterInstaller] , and finish to close the
installer. Then, set the IP address for the
IS700C using the RISO Management Tool
before installing the printer driver.
“Communication settings”
) p.39