Rishabh RISH CON - Hz, Руководство по эксплуатации, Страница: 27 / 60

25
ON O/P1 O/P2 COM
O/P 1
A
1, (considerd as DC Current). The Elbow value can be set
any value between set Start and End value of
Output1.
Pressing the “ Down” key will
enter the “ New/Change Elbow
value of the Output 1 edit” mode.
Pressing “ Up” key will set
the present value as Elbow value
of the Output 1 and advance to
the Output 2 characteristics
setting(section 3.1.5.2).
New/Change Elbow value of the Output 1
(*Denotes that digit will be flashing).
Pressing the “ Down” key will
scroll the value of the first digit
from 0 through to 1, the value will
wrap from 1 round to 0 depending
on the set End value of Output.
Pressing the “
Up” key will
advance the operation to the next
digit and set the first digit, in this
case to “1”.
Enter New / Change Elbow value
of the Output 1, first digit entered,
prompting for second digit.
(*Denotes that digit will be
flashing).
Pressing the “ Down” key will
scroll the value of the second
digit from 0 through to 9, the
Ú
Ù
Ú
Ù
Ú
ON O/P1 O/P2 COM
O/P 1
A
*
ON O/P1 O/P2 COM
O/P 1
A
*